Relationship between circulating FSH levels and body composition and bone health in patients with prostate cancer who undergo androgen deprivation therapy: The BLADE study.

Background: Among its extragonadal effects, follicle-stimulating hormone (FSH) has an impact on body composition and bone metabolism. Since androgen deprivation therapy (ADT) has a profound impact on circulating FSH concentrations, this hormone could potentially be implicated in the changes of fat body mass (FBM), lean body mass (LBM), and bone fragility induced by ADT. The objective of this study is to correlate FSH serum levels with body composition parameters, bone mineral density (BMD), and bone turnover markers at baseline conditions and after 12 months of ADT. Methods: Twenty-nine consecutive non-metastatic prostate cancer (PC) patients were enrolled from 2017 to 2019 in a phase IV study. All patients underwent administration of the luteinizing hormone-releasing hormone antagonist degarelix. FBM, LBM, and BMD were evaluated by dual-energy x-ray absorptiometry at baseline and after 12 months of ADT. FSH, alkaline phosphatase, and C-terminal telopeptide of type I collagen were assessed at baseline and after 6 and 12 months. For outcome measurements and statistical analysis, t-test or sign test and Pearson or Spearman tests for continuous variables were used when indicated. Results: At baseline conditions, a weak, non-significant, direct relationship was found between FSH serum levels and FBM at arms (r = 0.36) and legs (r = 0.33). Conversely, a stronger correlation was observed between FSH and total FBM (r = 0.52, p = 0.006), fat mass at arms (r = 0.54, p = 0.004), and fat mass at trunk (r = 0.45, p = 0.018) assessed after 12 months. On the other hand, an inverse relationship between serum FSH and appendicular lean mass index/FBM ratio was observed (r = -0.64, p = 0.001). This is an ancillary study of a prospective trial and this is the main limitation. Conclusions: FSH serum levels after ADT could have an impact on body composition, in particular on FBM. Therefore, FSH could be a promising marker to monitor the risk of sarcopenic obesity and to guide the clinicians in the tailored evaluation of body composition in PC patients undergoing ADT. Funding: This research was partially funded by Ferring Pharmaceuticals. The funder had no role in design and conduct of the study, collection, management, analysis, and interpretation of the data and in preparation, review, or approval of the manuscript. Clinical trial number: clinicalTrials.gov NCT03202381, EudraCT Number 2016-004210-10.

Treatments given to cancer patients can cause negative side effects. For example, a treatment known as androgen deprivation therapy ­ which is used to reduce male sex hormone levels in prostate cancer patients ­ can lead to increased body fat percentage and decreased bone density. These adverse effects can have further negative impacts on patient health, such as increasing the risk of cardiovascular disease and fractures from falls from standing height or less, respectively. Understanding how androgen deprivation therapy contributes to these negative side effects may help clinicians better manage care and outcomes for patients with prostate cancer. Follicle stimulating hormone (or FSH for short) has roles in male and female reproduction but has also been linked to changes in body composition. For example, elevated FSH levels are associated with higher total fat body mass in post-menopausal women. While androgen deprivation therapy is known to alter FSH blood levels, the impact of this change in prostate cancer patients was not well understood. To investigate the effect of androgen deprivation therapy on FSH levels and body composition, Bergamini et al. used X-ray technology to measure total fat body mass in prostate cancer patients before and after undergoing 12 months of androgen deprivation therapy. The findings showed that patient FSH blood levels significantly decreased after 12 months of treatment. Higher FSH blood levels strongly correlated with increased total fat body mass after 12 months of treatment. The findings of this clinical trial suggest that FSH blood levels impact the body composition of patients undergoing androgen deprivation therapy. As a result, FSH blood levels may be a suitable biomarker for identifying patients that are more likely to develop obesity and are therefore at greater risk of complications such as cardiovascular disease.

The relationship between bone strain index, bone mass, microarchitecture and mechanical behavior in human vertebrae: an ex vivo study.

The aim of this study was to determine whether the Bone Strain Index (BSI), a recent DXA-based bone index, is related to bone mechanical behavior, microarchitecture and finally, to determine whether BSI improves the prediction of bone strength and the predictive role of BMD in clinical practice. PURPOSE: Bone Strain Index (BSI) is a new DXA-based bone index that represents the finite element analysis of the bone deformation under load. The current study aimed to assess whether the BSI is associated with 3D microarchitecture and the mechanical behavior of human lumbar vertebrae. METHODS: Lumbar vertebrae (L3) were harvested fresh from 31 human donors. The anteroposterior BMC (g) and aBMD (g/cm2) of the vertebral body were measured using DXA, and then the BSI was automatically derived. The trabecular bone volume (Tb.BV/TV), trabecular thickness (Tb.Th), degree of anisotropy (DA), and structure model index (SMI) were measured using µCT with a 35-µm isotropic voxel size. Quasi-static uniaxial compressive testing was performed on L3 vertebral bodies under displacement control to assess failure load and stiffness. RESULTS: The BSI was significantly correlated with failure load and stiffness (r = -0.60 and -0.59; p < 0.0001), aBMD and BMC (r = -0.93 and -0.86; p < 0.0001); Tb.BV/TV and SMI (r = -0.58 and 0.51; p = 0.001 and 0.004 respectively). After adjustment for aBMD, the association between BSI and stiffness, BSI and SMI remained significant (r = -0.51; p = 0.004 and r = -0.39; p = 0.03 respectively, partial correlations) and the relation between BSI and failure load was close to significance (r = -0.35; p = 0.06). CONCLUSION: The BSI was significantly correlated with the microarchitecture and mechanical behavior of L3 vertebrae, and these associations remained statistically significant regardless of aBMD.

Fat Body Mass and Vertebral Fracture Progression in Women With Breast Cancer.

Importance: Women with early breast cancer (EBC) exposed to aromatase inhibitors (AIs) may experience fragility fractures despite treatment with bone-active drugs. Risk factors for fractures in patients receiving AIs and denosumab have not been explored to date. Objectives: To evaluate whether an association exists between dual x-ray absorptiometry (DXA)-measured fat body mass (FBM) and vertebral fracture (VF) progression in postmenopausal women with EBC undergoing adjuvant therapy with AIs in combination with denosumab and to examine whether VF was associated with common risk factors for bone fracture and parameters of body composition other than FBM. Design, Setting, and Participants: For this prospective, single-center, cohort study, 237 patients with EBC who were undergoing adjuvant treatment with AIs and denosumab (60 mg every 6 months) were enrolled at the Breast Unit of the ASST Spedali Civili of Brescia from September 2014 to June 2018. Data analysis was conducted in June 2022. Exposure: Body composition parameters, bone mineral density, and morphometric VFs were assessed by DXA at study entry and after 18 months of therapy. Main Outcomes and Measures: VF progression, defined as either new or worsening of preexisting VFs, between the 2 time points. Results: Of the 237 patients enrolled (median [range] age, 61 [28-84] years), 17 (4.4%) reported VF progression. Univariable analysis found an association between VF progression and a history of clinical fractures (odds ratio [OR], 3.22; 95% CI, 1.19-8.74; P = .02), Fracture Risk Assessment Tool (FRAX) score for major fractures (OR, 4.42; 95% CI, 1.23-13.79; P = .04), percentage of FBM (OR, 6.04; 95% CI, 1.69-21.63; P = .006), and android fat (OR, 9.58; 95% CI, 1.17-78.21; P = .04) and an inverse association with appendicular lean mass index-FBM ratio (OR, 0.25, 95% CI, 0.08-0.82; P = .02). Multivariable analysis revealed percentage of FBM (OR, 5.41; 95% CI, 1.49-19.59; P = .01) and FRAX score (OR, 3.95; 95% CI, 1.09-14.39; P = .04) as independent variables associated with VF progression. Conclusions and Relevance: The findings of this study suggest that baseline FBM is an independent factor for VF progression in patients with EBC treated with adjuvant AIs and denosumab. This observation is new and indicates that diet and exercise may synergize with denosumab in the management of bone health in this patient setting.

Assessment of DXA derived bone quality indexes and bone geometry parameters in early breast cancer patients: A single center cross-sectional study.

Background: Bone mineral density (BMD) lacks sensitivity in individual fracture risk assessment in early breast cancer (EBC) patients treated with aromatase inhibitors (AIs). New dual-energy X-ray absorptiometry (DXA) based risk factors are needed. Methods: Trabecular bone score (TBS), bone strain index (BSI) and DXA parameters of bone geometry were evaluated in postmenopausal women diagnosed with EBC. The aim was to explore their association with morphometric vertebral fractures (VFs). Subjects were categorized in 3 groups in order to evaluate the impact of AIs and denosumab on bone geometry: AI-naive, AI-treated minus (AIDen-) or plus (AIDen+) denosumab. Results: A total of 610 EBC patients entered the study: 305 were AI-naive, 187 AIDen-, and 118 AIDen+. In the AI-naive group, the presence of VFs was associated with lower total hip BMD and T-score and higher femoral BSI. As regards as bone geometry parameters, AI-naive fractured patients reported a significant increase in femoral narrow neck (NN) endocortical width, femoral NN subperiosteal width, intertrochanteric buckling ratio (BR), intertrochanteric endocortical width, femoral shaft (FS) BR and endocortical width, as compared to non-fractured patients. Intertrochanteric BR and intertrochanteric cortical thickness significantly increased in the presence of VFs in AIDen- patients, not in AIDen+ ones. An increase in cross-sectional area and cross-sectional moment of inertia, both intertrochanteric and at FS, significantly correlated with VFs only in AIDen+. No association with VFs was found for either lumbar BSI or TBS in all groups. Conclusions: Bone geometry parameters are variably associated with VFs in EBC patients, either AI-naive or AI treated in combination with denosumab. These data suggest a tailored choice of fracture risk parameters in the 3 subgroups of EBC patients.

DXA-based bone strain index in normocalcemic primary hyperparathyroidism.

The trabecular and cortical bone assessed by bone strain index seems not to be significantly affected in NHPT. INTRODUCTION: The natural history and bone involvement of normocalcemic hyperparathyroidism (NHPT) are not fully clarified yet. The bone strain index (BSI) is a deformation index based on the finite element method and can be applied to DXA scans. In this study, we aim to assess BSI in subjects with NHPT. METHOD: A case-control study included 170 subjects: 40 subjects with NHPT, 50 subjects with primary hypercalcemic hyperparathyroidism (PHPT), and 80 controls (age- and sex-matched with the NPTH group). RESULTS: Lumbar spine (LS) bone mineral density (BMD), femoral neck (FN) BMD, total hip (TH) BMD, and TBS were similar between NHPT and both PHPT and controls. FN-BSI was lower in NHPT compared to PHPT (1.52 ± 0.31 vs 1.72 ± 0.42 p = 0.031) while there were no differences between NHPT and controls. TH-BSI was lower in NHPT compared to PHPT (1.36 ± 0.23 vs 1.52 ± 0.34, p = 0.030), while there were no differences between NHPT and controls. LS-BSI was not different between NHPT and both PHPT and controls. CONCLUSION: The trabecular and cortical bones assessed by BSI seem not to be significantly impaired in NHPT. Further prospective studies are needed to confirm these findings and to give an insight into the natural history of NHPT to improve knowledge and management of this condition.

Bone Strain Index: preliminary distributional characteristics in a population of women with normal bone mass, osteopenia and osteoporosis.

PURPOSE: Bone Strain Index (BSI) is a recently developed dual-energy X-ray absorptiometry (DXA) software, applying a finite element analysis on lumbar spine and femoral DXA scans. BSI is a parameter of bone deformation, providing information on bone resistance to applied loads. BSI values indicate the average bone strain in the explored site, where a higher strain (higher BSI values) suggests a higher fracture risk. This study reports the distributional characteristics of lumbar BSI (L-BSI) in women with normal bone mass, osteopenia or osteoporosis and their relationships with BMD, weight, height and BMI. MATERIAL AND METHODS: Two-hundred-fifty-nine consecutive unfractured women who performed DXA were divided into three groups based on BMD T-score: normal bone mass (n = 43, 16.6%), osteopenia (n = 82, 31.7%) and osteoporosis (n = 134, 51.7%). The distribution of L-BSI was evaluated with conventional statistical methods, histograms and by calculating parametric and nonparametric 95% confidence intervals, together with the 90%, 95% and 99% bilateral tolerance limits with a 95% confidence. RESULTS: Ninety percent bilateral tolerance limits with 95% confidence for L-BSI distribution are 1.0-2.40, 0.95-2.63 and 0.84-3.15 in the group of patients with normal bone mass, 1.34-2.78, 1.24-2.95 and 1.05-3.32 in the osteopenic group and 1.68-3.79, 1.58-4.15 and 1.40-4.96 in the osteoporotic group. CONCLUSION: In women without vertebral fractures at baseline, L-BSI values from 1.68 (osteoporotic group) and 2.40 (upper of the normal bone mass group) can be tentatively chosen as a lower and upper threshold to stratify postmenopausal women according to their bone resistance to loads.

Effect of Degarelix Administration on Bone Health in Prostate Cancer Patients Without Bone Metastases. The Blade Study.

CONTEXT: As patients are now living with prostate cancer for longer, the long-term impact of hormonal treatment on bone health is an increasingly debated subject. OBJECTIVE: To characterize the changes in bone mineral density (BMD) and bone turnover markers after degarelix administration in prostate cancer patients without bone metastases. To explore the predictive role of body composition on treatment induced bone loss. METHODS: BMD and body composition (lean body mass, fat body mass, and appendicular mass index [ALMI]) were assessed by dual X-ray absorptiometry on study entry and after 12 months of degarelix therapy. Alkaline phosphate (ALP) and C-terminal telopeptide of type I collagen (CTX) were assessed at baseline, and 6 and 12 months. RESULTS: Twenty-nine patients entered the study. Degarelix administration was associated with a significant decrease in BMD after 12 months (2.4% reduction from baseline at lumbar spine). Serum CTX and ALP increased significantly (median increase from baseline 99% and 19.3%, respectively). An inverse correlation was observed between ALMI and CTX, but not ALP, at both baseline (Pearson r = -0.62, P < .0001) and month 12 (Pearson r = -0.41, P = .032). Moreover, a significant inverse correlation between changes in ALMI and CTX at 12 months (Pearson r = -0.43, P = .019) and a direct relationship between changes of ALMI and ALP (Pearson r = 0.44, P = .016) during degarelix therapy were observed. CONCLUSION: Degarelix administration is associated with a significant decrease in BMD and increase in bone turnover markers. ALMI is a promising predictor of bone loss in prostate cancer patients receiving androgen deprivation therapy, and ALMI changes during therapy are associated with bone turnover derangement favoring bone quality alterations.

The Bone Strain Index: An Innovative Dual X-ray Absorptiometry Bone Strength Index and Its Helpfulness in Clinical Medicine.

Bone strain Index (BSI) is an innovative index of bone strength that provides information about skeletal resistance to loads not considered by existing indexes (Bone Mineral Density, BMD. Trabecular Bone Score, TBS. Hip Structural Analysis, HSA. Hip Axis Length, HAL), and, thus, improves the predictability of fragility fractures in osteoporotic patients. This improved predictability of fracture facilitates the possibility of timely intervention with appropriate therapies to reduce the risk of fracture. The development of the index was the result of combining clinical, radiographical and construction-engineering skills. In fact, from a physical point of view, primary and secondary osteoporosis, leading to bone fracture, are determined by an impairment of the physical properties of bone strength: density, internal structure, deformation and fatigue. Dual X-ray absorptiometry (DXA) is the gold standard for assessing bone properties, and it allows measurement of the BMD, which is reduced mainly in primary osteoporosis, the structural texture TBS, which can be particularly degraded in secondary osteoporosis, and the bone geometry (HSA, HAL). The authors recently conceived and developed a new bone deformation index named Bone Strain Index (BSI) that assesses the resistance of bone to loads. If the skeletal structure is equated to engineering construction, these three indexes are all considered to determine the load resistance of the construct. In particular, BSI allows clinicians to detect critical information that BMD and TBS cannot explain, and this information is essential for an accurate definition of a patient's fracture risk. The literature demonstrates that both lumbar and femoral BSI discriminate fractured osteoporotic people, that they predict the first fragility fracture, and further fragility fractures, monitor anabolic treatment efficacy and detect patients affected by secondary osteoporosis. BSI is a new diagnostic tool that offers a unique perspective to clinical medicine to identify patients affected by primary and, specially, secondary osteoporosis. This literature review illustrates BSI's state of the art and its ratio in clinical medicine.

The bone strain index predicts fragility fractures. The OFELY study.

Recently, the bone strain index (BSI), a new index of bone strength based on a finite element model (FEA) from dual X-ray absorptiometry (DXA), has been developed. BSI represents the average equivalent strain inside the bone, assuming that a higher strain level (high BSI) indicates a condition of higher risk. Our study aimed to analyze the relationship between BSI and age, BMI and areal BMD in pre- and postmenopausal women and to prospectively investigate fracture prediction (Fx) by BSI in postmenopausal women. Methods. At the 14th annual follow-up of the OFELY study, BSI was measured at spine (Spine BSI) and femoral scans (Neck and Total Hip BSI), in addition to areal BMD with DXA (Hologic QDR 4500) in 846 women, mean (SD) age 60 yr (15). The FRAX® (fracture risk assessment tool) for major osteoporotic fractures (MOF) was calculated with FN areal BMD (aBMD) at baseline; incident fragility fractures were annually registered until January 2016. Results. In premenopausal women (n = 261), Neck and Total Hip BSI were slightly negatively correlated with age (Spearman r = -0.13 and -0.15 respectively, p = 0.03), whereas all BSIs were positively correlated with BMI (r = +0.20 to 0.37, p < 0.01) and negatively with BMD (r = -0.69 to -0.37, p < 0.0001). In postmenopausal women (n = 585), Neck and Total Hip BSI were positively correlated with age (Spearman r = +0.26 and +0.31 respectively, p < 0.0001), whereas Spine BSI was positively correlated with BMI (r = +0.22, p < 0.0001) and all BSIs were negatively correlated with BMD (r = -0.81 to -0.60, p < 0.0001). During a median [IQ] 9.3 [1.0] years of follow-up, 133 postmenopausal women reported an incident fragility Fx, including 80 women with a major osteoporotic Fx (MOF) and 26 women with clinical vertebral Fx (VFx). Each SD increase of BSI value was associated with a significant increase of the risk of all fragility Fx with an age-adjusted HR of 1.23 for Neck BSI (p = 0.02); 1.27 for Total Hip BSI (p = 0.004) and 1.35 for Spine BSI (p < 0.0001). After adjustment for FRAX®, the association remained statistically significant for Total Hip BSI (HR 1.24, p = 0.02 for all fragility Fx; 1.31, p = 0.01 for MOF) and Spine BSI (HR 1.33, p < 0.0001 for all fragility Fx; 1.33, p = 0.005 for MOF; 1.67, p = 0.002 for clinical VFx). In conclusion, spine and femur BSI, an FEA DXA derived index, predict incident fragility fracture in postmenopausal women, regardless of FRAX®.

Bone Strain Index predicts fragility fracture in osteoporotic women: an artificial intelligence-based study.

BACKGROUND: We applied an artificial intelligence-based model to predict fragility fractures in postmenopausal women, using different dual-energy x-ray absorptiometry (DXA) parameters. METHODS: One hundred seventy-four postmenopausal women without vertebral fractures (VFs) at baseline (mean age 66.3 ± 9.8) were retrospectively evaluated. Data has been collected from September 2010 to August 2018. All subjects performed a spine x-ray to assess VFs, together with lumbar and femoral DXA for bone mineral density (BMD) and the bone strain index (BSI) evaluation. Follow-up exams were performed after 3.34 ± 1.91 years. Considering the occurrence of new VFs at follow-up, two groups were created: fractured versus not-fractured. We applied an artificial neural network (ANN) analysis with a predictive tool (TWIST system) to select relevant input data from a list of 13 variables including BMD and BSI. A semantic connectivity map was built to analyse the connections among variables within the groups. For group comparisons, an independent-samples t-test was used; variables were expressed as mean ± standard deviation. RESULTS: For each patient, we evaluated a total of n = 6 exams. At follow-up, n = 69 (39.6%) women developed a VF. ANNs reached a predictive accuracy of 79.56% within the training testing procedure, with a sensitivity of 80.93% and a specificity of 78.18%. The semantic connectivity map showed that a low BSI at the total femur is connected to the absence of VFs. CONCLUSION: We found a high performance of ANN analysis in predicting the occurrence of VFs. Femoral BSI appears as a useful DXA index to identify patients at lower risk for lumbar VFs.

2D and 3D numerical models to evaluate trabecular bone damage.

The comprehension of trabecular bone damage processes could be a crucial hint for understanding how bone damage starts and propagates. Currently, different approaches to bone damage identification could be followed. Clinical approaches start from dual X-ray absorptiometry (DXA) technique that can evaluate bone mineral density (BMD), an indirect indicator of fracture risk. DXA is, in fact, a two-dimensional technology, and BMD alone is not able to predict the effective risk of fractures. First attempts in overcoming this issue have been performed with finite element (FE) methods, combined with the use of three-dimensional high-resolution micro-computed tomographic images. The purpose of this work is to evaluate damage initiation and propagation in trabecular vertebral porcine samples using 2D linear-elastic FE models from DXA images and 3D linear FE models from micro-CT images. Results show that computed values of strains with 2D and 3D approaches (e.g., the minimum principal strain) are of the same order of magnitude. 2D DXA-based models still remain a powerful tool for a preliminary screening of trabecular regions that are prone to fracture, while from 3D micro-CT-based models, it is possible to reach details that permit the localization of the most strained trabecula.

DXA-Based Bone Strain Index: A New Tool to Evaluate Bone Quality in Primary Hyperparathyroidism.

CONTEXT: Primary hyperparathyroidism (PHPT) is associated with impaired bone quality and increased fracture risk. Reliable tools for the evaluation of bone quality parameters are not yet clinically available. Bone Strain Index (BSI) is a new metric for bone strength based on Finite Element Analysis from lumbar spine and femoral neck dual-energy x-ray absorptiometry (DXA) images. OBJECTIVE: To assess the lumbar spine (LS), femoral neck (FN), and total hip (TH) BSI in PHPT patients compared with controls and to investigate the association of BSI with vertebral fractures (VFs) in PHPT. METHODS: This case-control study enrolled 50 PHPT patients and 100 age- and sex-matched control subjects from an outpatient clinic. The main outcome measures were LS-BSI, FN-BSI, and TH-BSI. RESULTS: FN bone mineral density (BMD) and one-third distal radius BMD were lower in the PHPT group than in controls (FN 0.633 ± 0.112 vs 0.666 ± 0.081, P = 0.042; radius 0.566 ± 0.07 vs 0.625 ± 0.06, P < 0.001). PHPT group has significant lower TBS score compared with controls (1.24 ± 0.09 vs 1.30 ± 0.10, P < 0.001). BSI was significantly higher at LS (2.28 ± 0.59 vs 2.02 ± 0.43, P = 0.009), FN (1.72 ± 0.41 vs 1.49 ± 0.35, P = 0.001), and TH (1.51 ± 0.33 vs 1.36 ± 0.25, P = 0.002) in PHPT. LS-BSI showed moderate accuracy for discriminating VFs (AUC 0.667; 95% CI, 0.513-0.820). LS-BSI ≥ 2.2 and was a statistically significant independent predictor of VFs, with an adjusted odds ratio ranging from 5.7 to 15.1. CONCLUSION: BSI, a DXA-derived bone quality index, is impaired in PHPT and may help to identify PHPT subjects at high risk of fractures.

Changes in body composition and lipid profile in prostate cancer patients without bone metastases given Degarelix treatment: the BLADE prospective cohort study.

BACKGROUND: Luteinizing hormone-releasing hormone (LHRH)-agonists in prostate cancer (PCa) patients induce sarcopenic obesity. The effect of LHRH-antagonist on body composition has never been explored. We evaluated changes in fat (FBM) and lean body mass (LBM) in PCa patients undergoing Degarelix. METHODS: This is a single-center prospective study, enrolling 29 non-metastatic PCa patients eligible to LHRH-antagonist from 2017 to 2019. All patients received monthly subcutaneous injection of Degarelix for 12 months. Changes in FBM and LBM between baseline and 12-month Degarelix, as measured by dual-energy x-ray absorptiometry, were the co-primary endpoints. Secondary endpoints were changes in serum lipids, glucose profile and follicle-stimulating hormone (FSH). Appendicular lean mass index (ALMI) and ALMI/FBM ratio were assessed as post-hoc analyses. Linear mixed models with random intercept tested for estimated least squared means differences (EMD). RESULTS: FBM significantly increased after 12 months (EMD +2920.7, +13.8%, p < 0.001), whereas LBM remained stable (EMD -187.1, -0.3%, p = 0.8). No differences occurred in lipid profile. Glycated hemoglobin significantly increased and serum FSH significantly decreased. A significant inverse relationship was found between serum FSH and ALMI/FBM ratio after 12 month (r = -0.44, p = 0.02). CONCLUSIONS: The BLADE study prospectively evaluated changes in body composition after LHRH-antagonist. LHRH-antagonist therapy is associated to an increased risk of obesity and diabetes, but lean body mass and serum lipids are not affected. This may represent an additional evidence supporting the reduced cardiovascular risk associated with LHRH-antagonist. The role of FSH in influencing sarcopenic obesity in PCa after androgen deprivation deserves to be further explored.

Bone strain index as a predictor of further vertebral fracture in osteoporotic women: An artificial intelligence-based analysis.

BACKGROUND: Osteoporosis is an asymptomatic disease of high prevalence and incidence, leading to bone fractures burdened by high mortality and disability, mainly when several subsequent fractures occur. A fragility fracture predictive model, Artificial Intelligence-based, to identify dual X-ray absorptiometry (DXA) variables able to characterise those patients who are prone to further fractures called Bone Strain Index, was evaluated in this study. METHODS: In a prospective, longitudinal, multicentric study 172 female outpatients with at least one vertebral fracture at the first observation were enrolled. They performed a spine X-ray to calculate spine deformity index (SDI) and a lumbar and femoral DXA scan to assess bone mineral density (BMD) and bone strain index (BSI) at baseline and after a follow-up period of 3 years in average. At the end of the follow-up, 93 women developed a further vertebral fracture. The further vertebral fracture was considered as one unit increase of SDI. We assessed the predictive capacity of supervised Artificial Neural Networks (ANNs) to distinguish women who developed a further fracture from those without it, and to detect those variables providing the maximal amount of relevant information to discriminate the two groups. ANNs choose appropriate input data automatically (TWIST-system, Training With Input Selection and Testing). Moreover, we built a semantic connectivity map usingthe Auto Contractive Map to provide further insights about the convoluted connections between the osteoporotic variables under consideration and the two scenarios (further fracture vs no further fracture). RESULTS: TWIST system selected 5 out of 13 available variables: age, menopause age, BMI, FTot BMC, FTot BSI. With training testing procedure, ANNs reached predictive accuracy of 79.36%, with a sensitivity of 75% and a specificity of 83.72%. The semantic connectivity map highlighted the role of BSI in predicting the risk of a further fracture. CONCLUSIONS: Artificial Intelligence is a useful method to analyse a complex system like that regarding osteoporosis, able to identify patients prone to a further fragility fracture. BSI appears to be a useful DXA index in identifying those patients who are at risk of further vertebral fractures.

Short-Term Precision Error of Bone Strain Index, a New DXA-Based Finite Element Analysis Software for Assessing Hip Strength.

Bone Strain Index (BSI) is a new finite element analysis tool applied to hip dual energy X-ray absorptiometry scans. The aim of this study was to assess the short-term precision error of BSI on the proximal femur, both on a phantom and patients. The International Society for Clinical Densitometry guidelines were followed for short-term precision error assessment. Dual energy X-ray absorptiometry measurements were performed on an anthropomorphic femur phantom that was scanned twice for 30 times, for a total of 60 scans. For the in vivo part, 30 subjects were scanned twice. BSI precision error was compared to that of bone mineral density (BMD). Both for the phantom and the in vivo study BSI reproducibility was lower compared to that of BMD, as the precision error of BSI resulted 3 times higher compared to that BMD. For phantom measurements, the highest precision value was that of total femur (TF) BMD (coefficient of variation [CoV] = 0.63%, reproducibility = 98.24%), while the lowest precision was the femoral neck (FN) BSI (CoV = 3.08%, reproducibility = 91.48%). Similarly, for the in vivo study, the highest precision was found at TF BMD (CoV = 1.36%, reproducibility = 96.22%), while the lowest value of precision was found for FN BSI (CoV = 4.17%, reproducibility = 88.46%). Reproducibility at TF was always better compared to that of the FN. BSI precision error was about 3 times higher compared to BMD, confirming previous results of lumbar spine BSI. The main source of variability of this new software is related to patient positioning.

Usefulness of Dual X-ray Absorptiometry-Derived Bone Geometry and Structural Indexes in Mastocytosis.

Reduced bone mass with or without fragility fractures is a common feature of mastocytosis, particularly in adult males. However, bone mineral density does not account for all the fragility fractures, being a part of them attributable to impairment in bone quality. Aim of this study is to assess the usefulness of DXA-derived geometry and structural indexes in the assessment of bone status in mastocytosis. Ninety-six consecutive patients (46 women and 50 men) affected by cutaneous (CM) or systemic (SM) mastocytosis were studied. Mean age (± SD) was 53.3 ± 14.23. Spine lateral X-rays for Genant's scale, DXA for lumbar (L) and femoral (F) bone mineral density (BMD), bone strain index (BSI), lumbar trabecular bone score (TBS), and hip structural analysis (HSA) were performed. Among the laboratory variables, data of serum tryptase were reported. Tryptase was higher in SM (p = 0.035), inversely correlated with LBMD (r = - 0.232; p = 0.022) and TBS (r = - 0.280; p = 0.005), and directly with L-BSI (r = 0.276; p = 0.006). L-BSI remained statistically significant (p = 0.006; adjusted R2 = 0.101) together with mastocytosis (SM or CM: p = 0.034) in the multivariate regression model with tryptase as dependent variable, being LBMD and TBS not statistically significant (p = 0.887, and p = 0.245, respectively). Tryptase increased about 22 units for each unit increase of L-BSI and about 18 units for SM against CM. L-BSI was lower (p = 0.012), while FN-BSI and FT-BSI were higher in women (p < 0.001) than in men. HSA indexes were significantly higher in men, particularly with SM. SM is a risk factor for reduced bone mass, texture and strength. Since mean L-BSI and Z-modulus of all the femoral sites are statistically higher in men than in female, it could be argued that men have a better femoral bone resistance to bending forces than women, but a worse lumbar bone resistance to compressive loads. DXA indexes of bone quality are useful in mastocytosis' bone assessment and its clinical management.

Bone strain index in the prediction of vertebral fragility refracture.

Dual-energy x-ray absorptiometry (DXA) can provide quantitative (bone mineral density, BMD) and qualitative (trabecular bone score, TBS) indexes of bone status, able to predict fragility fractures in most osteoporotic patients. A new qualitative index of bone strength, based on finite element analysis and named bone strain index (BSI), has been recently developed from lumbar DXA scan. We present the preliminary results about the BSI ability to predict a refracture in patients with fragility fractures. A total of 143 consecutive fractured patients with primary osteoporosis (121 females) performed a spine x-ray examination for the calculation of spine deformity index (SDI) and a DXA densitometry for BMD, TBS, and BSI at basal time and in the follow-up. A refracture was considered as a one-unit increase in SDI. For each unit increase of the investigated indexes, the hazard ratio of refracture, 95% confidence interval, p value, and proportionality test p value were for BSI 1.201, 0.982-1.468, 0.074, and 0.218; for lumbar BMD 0.231, 0.028-1.877, 0.170, and 0.305; and for TBS 0.034, 0.001-2.579, 0.126, and 0.518, respectively. BSI was the index predictive of refracture nearest to statistical significance. If confirmed, it may be used for a better risk assessment of osteoporotic patients.

Artificial neural network analysis of bone quality DXA parameters response to teriparatide in fractured osteoporotic patients.

Teriparatide is a bone-forming therapy for osteoporosis that increases bone quantity and texture, with uncertain action on bone geometry. No data are available regarding its influence on bone strain. To investigate teriparatide action on parameters of bone quantity and quality and on Bone Strain Index (BSI), also derived from DXA lumbar scan, based on the mathematical model finite element method. Forty osteoporotic patients with fractures were studied before and after two years of daily subcutaneous 20 mcg of teriparatide with dual X-ray photon absorptiometry to assess bone mineral density (BMD), hip structural analysis (HSA), trabecular bone score (TBS), BSI. Spine deformity index (SDI) was calculated from spine X-ray. Shapiro-Wilks, Wilcoxon and Student's t test were used for classical statistical analysis. Auto Contractive Map was used for Artificial Neural Network Analysis (ANNs). In the entire population, the ameliorations after therapy regarded BSI (-13.9%), TBS (5.08%), BMD (8.36%). HSA parameters of femoral shaft showed a worsening. Dividing patients into responders (BMD increase >10%) and non-responders, the first presented TBS and BSI ameliorations (11.87% and -25.46%, respectively). Non-responders presented an amelioration of BSI only, but less than in the other subgroup (-6.57%). ANNs maps reflect the mentioned bone quality improvements. Teriparatide appears to ameliorate not only BMD and TBS, but also BSI, suggesting an increase of bone strength that may explain the known reduction in fracture risk, not simply justified by BMD increase. BSI appears to be a sensitive index of TPD effect. ANNs appears to be a valid tool to investigate complex clinical systems.

Beyond Bone Mineral Density: A New Dual X-Ray Absorptiometry Index of Bone Strength to Predict Fragility Fractures, the Bone Strain Index.

For a proper assessment of osteoporotic fragility fracture prediction, all aspects regarding bone mineral density, bone texture, geometry and information about strength are necessary, particularly in endocrinological and rheumatological diseases, where bone quality impairment is relevant. Data regarding bone quantity (density) and, partially, bone quality (structure and geometry) are obtained by the gold standard method of dual X-ray absorptiometry (DXA). Data about bone strength are not yet readily available. To evaluate bone resistance to strain, a new DXA-derived index based on the Finite Element Analysis (FEA) of a greyscale of density distribution measured on spine and femoral scan, namely Bone Strain Index (BSI), has recently been developed. Bone Strain Index includes local information on density distribution, bone geometry and loadings and it differs from bone mineral density (BMD) and other variables of bone quality like trabecular bone score (TBS), which are all based on the quantification of bone mass and distribution averaged over the scanned region. This state of the art review illustrates the methodology of BSI calculation, the findings of its in reproducibility and the preliminary data about its capability to predict fragility fracture and to monitor the follow up of the pharmacological treatment for osteoporosis.

Reproducibility of DXA-based bone strain index and the influence of body mass: an in vivo study.

OBJECTIVES: Bone strain index (BSI) is a dual-energy X-ray absorptiometry (DXA)-derived index of bone strength obtained from lumbar densitometric scan. We estimated the reproducibility of BSI in healthy women with different body mass index. METHODS: We enrolled postmenopausal women (mean age ± SD: 66 ± 10 years) divided into three groups (A, B and C) according to body mass index (BMI: < 25; 25-29.9; ≥ 30 kg/m2) and two groups (D and E) according to waist circumference (WC: ≤ 88; > 88 cm), each of 30 subjects. They underwent two DXA examinations with in-between repositioning, according to the International Society for Clinical Densitometry guidelines for precision estimation. Bone mineral density (BMD) and BSI were expressed as g/cm2 and absolute value, respectively. The coefficient of variation (CoV) was calculated as the ratio between root-mean-square standard deviation and mean; least significant change percentage (LSC%) as 2.77 × CoV; reproducibility as the complement to 100% LSC. RESULTS: BSI increased proportionally to BMI and WC and significantly in group C compared to B and A (p = 0.032 and 0.006, respectively). BSI was significantly higher in E compared to D (p = 0.017), whereas no differences were observed in BMD. Although BSI reproducibility was slightly lower in group C (89%), the differences were not significant between all groups. BMD reproducibility did not significantly differ between all groups. CONCLUSIONS: BSI reproducibility was significantly lower than that of BMD and decreased proportionally to BMI and WC increase. This reduction of BSI reproducibility was more pronounced in patients with BMI ≥ 30 and WC > 88, as expected, being BSI a parameter sensible to weight.